May 19, 2024

Tips for Maintaining Your A/C Unit, According to Expert

The maintenance of an air-conditioner unit isn’t difficult, but it does require a certain amount of foresight and preparation. If you follow these simple steps, your A/C will stay running efficiently for as long as possible. If you live in an area that gets very hot during the summer, an air-conditioner is a must. But how do you keep a constant temperature in your home without overworking your A/C? Here are some tips from a professional air conditioning service provider:

Change your refrigerant frequently

In order for your A/C unit to run at its best efficiency, it must be set to run on the coldest setting. However, some refrigerants work better at different temperatures so it’s important to change your refrigerant when it gets too warm. Refrigerants can become less conductive as they warm so it’s important to change the refrigerant as soon as you notice the outside temperature getting above 90 degrees. You should change your refrigerant at least every six months and preferably every year. If you wait until the refrigerant gets too hot to change, the fluid in your unit will expand and cause uneven expansion and friction that will wear away your A/C unit components. Another issue with changing your refrigerant too often is that over time, certain contaminants like dirt and soap scum can build up in your system.

Keep ice- and frost-free areas free of moisture

You should clean your A/C unit every winter and spring to remove any build-up of moisture. This includes the filter, evaporator, condenser, and even the evaporator coil. Moisture attracts insects and bacteria so it’s important to keep these areas as dry as possible. If you’re using a humidifier, be sure to clean it too. You should clean your A/C unit every two years in the summer to keep it from getting too hot. However, this shouldn’t be done more frequently than that because doing so may cause your condenser to overheat. One last thing to remember is that you should clean your A/C unit at least once every five years.

Don’t use the same filter for more than one purpose

According to an expert air conditioning service professional, it’s important to change your filter when you get a new dirty one so you don’t overuse the same filter on another unit. One filter, one use only. One filter should be used for the entire unit not just a portion of it. If you’re using the same filter on two separate units, you’re keeping the moisture in the air in one area of your home while letting moisture in another. This is bad both for your equipment and the environment. Another issue with using the same filter is that over time, the dirt and debris that are taken out with the filter will get stuck in the filter and cause your system to overwork trying to remove it.

Be patient while your A/C works up a sweat

Whenever your A/C unit is working hard, it’s trying to pull in more air. This means that the airflow is “stressed” in the room where the A/C unit is located. If you’re not patient enough to wait for your A/C to work up a sweat, you may end up with a messy A/C unit. If you’re not patient enough to wait for your A/C unit to work up a sweat, you may end up with a messy A/C unit. Most air-conditioners have controls that allow you to increase the air flow only when you’re ready for it. If you’re not patient enough to wait for your A/C to work up a sweat, you may end up with a messy A/C unit. If you’re not patient enough to wait for your A/C unit to work up a sweat, you may end up with a messy A/C unit.